Graffiti Remover
Removes graffiti from surfaces protected with Nanoman Anti-Graffiti in 2 to 3 minutes.
Use with Nanoman anti-graffiti protection.
from ISK 6,510
41For professionals
Anti-Graffiti Coating for Porous Surfaces
Invisible anti-graffiti protection for concrete, brick and timber.
- Nanotechnology formula
- Non-sacrificial coating
- Up to 10 years
- One coat
- Durable life up to 10 years on vertical surfaces (depending on material, use, maintenance)
- Non-sacrificial: graffiti can be removed repeatedly without recoating
Choose size
ISK 25,020Retail price incl. VAT
NM-41-1L
Professional? Apply for access to the business area.
Pick up at Síðumúli 1 or delivery with Pósturinn or Dropp.
Key features
Anti-Graffiti Coating for Porous Surfaces protects porous surfaces such as concrete, brick, timber and painted surfaces against graffiti. It goes on in one coat, is invisible and does not change the look of the surface.
The protection is non-sacrificial. Graffiti can be removed again and again, for example with Graffiti Remover, without re-applying the protection. That saves time and cost and needs no complicated cleaning equipment.
On vertical surfaces the protection lasts up to 10 years, depending on the material, use and how the surface is maintained. It suits walls, fences, schools, public buildings, bridges and bus stops.
- Graffiti can be removed again and again without re-applying
- Non-sacrificial: not used up by cleaning
- Up to 10 years on vertical surfaces, depending on material, use and maintenance
- One coat, invisible finish
- For concrete, brick, timber, painted surfaces and murals
- No complicated cleaning equipment needed
Suitable for
- Walls, fences, schools and public buildings
- Bus stops, bridges and roads
- Bare brick and concrete
- Previously painted surfaces and murals
- Timber surfaces and cladding
Not suitable for
- Damp substrates, because the product will not seal them
- More than one coat
- Scrubbing to remove graffiti
- Cleaning tools with water, alcohol or turpentine
80–100
ml per square metre
Technical information
| Product number | 41 |
|---|---|
| Category | Graffiti |
| Sizes | 1 L, 4 L, 5 L, 20 L, bulk >250 L |
| Coverage | About 80 to 100 ml per square metre with the recommended spray equipment. More is used by roller or brush. |
| Lifetime | Up to 10 years on vertical surfaces. Lifespan depends on the material, use and how the surface is maintained. |
| Drying and curing | Touch dry after 1 hour and dry after 4 to 5 hours. Fully cured after 7 days. The surface must stay dry for at least 5 hours after application. |
Source: manufacturer's technical data sheet.
Directions for use
- Mask the surrounding areas with tape. The surface must be clean, completely dry and sound. Concrete and mortar must be fully cured. Dry-brush or pressure wash and leave to dry.
- Stir slowly and thoroughly and stir again every 15 to 20 minutes. If the temperature is below 20 °C, store the product indoors the day before. You can thin it by up to 30% with white spirit.
- Apply one coat by HVLP or airless sprayer, which works best on rough surfaces, or by roller or brush. Work in a cross pattern and do not overwork the surface.
- Correct mistakes within about 10 minutes. Touch dry after 1 hour and fully cured after 7 days. Clean tools with white spirit, never with water.
Good to know
- Paint will not stick to the coating, so do any painting before you apply it.
- Do not apply it to surfaces already treated with another product.
- Keep dust and sawdust away while you work and while the coating dries. Dirt spoils the finish.
Safety
- May cause an allergic skin reaction. Irritates the eyes and respiratory tract.
- Wear gloves and eye protection and work in a well-ventilated area.
- Keep out of reach of children. Read the safety data sheet (SDS) before use.
Test on a small area first and read the safety data sheet before use.
Questions and answers
What does non-sacrificial mean?
Graffiti can be removed many times without re-applying the protection. Use Graffiti Remover to take the graffiti off.
Which surfaces count as porous?
Absorbent surfaces such as concrete, brick, timber and painted surfaces. For metal and smooth surfaces there is Anti-Graffiti Coating for Non-Porous Surfaces.
How long does the protection last?
Up to 10 years on vertical surfaces. It depends on the material, use and how the surface is maintained.
Videos
Videos from Nanoman, in English.
Use with
Graffiti Remover is a system product intended for surfaces protected with Nanoman anti-graffiti coating.