Graffiti Remover
Removes graffiti from surfaces protected with Nanoman Anti-Graffiti in 2 to 3 minutes.
Use with Nanoman anti-graffiti protection.
from ISK 6,510
42For professionals
Anti-Graffiti Coating for Non-Porous Surfaces
Invisible anti-graffiti protection for metal and smooth surfaces.
- Nanotechnology formula
- Non-sacrificial coating
- Up to 7 years
- One coat
- Effective for approximately 7 to 10 years (brochures: up to 7)
- Non-sacrificial: repeated graffiti removal without reapplication
Choose size
Currently unavailable
NM-42-125ML
Professional? Apply for access to the business area.
Pick up at Síðumúli 1 or delivery with Pósturinn or Dropp.
Key features
Anti-Graffiti Coating for Non-Porous Surfaces protects smooth, non-absorbent surfaces such as metal, powder-coated and painted surfaces and fibreglass against graffiti. It goes on in one coat and the film is invisible.
The protection is non-sacrificial. Graffiti can be removed many times without re-applying the protection. With Graffiti Remover you save time and cost and do not need to re-coat after every clean.
It suits traffic signs, bollards, shipping containers, bridges and bus shelters. The protection lasts up to 7 years, depending on the material, use and how the surface is maintained.
- Graffiti can be removed again and again without re-applying
- Non-sacrificial: not used up by cleaning
- Up to 7 years, depending on material, use and maintenance
- One light coat, invisible film
- For aluminium, zinc, stainless steel, copper, brass and powder-coated metal
- A match for Graffiti Remover
Suitable for
- Metals and alloys: aluminium, zinc, stainless steel, copper, brass, bronze and corten
- Powder-coated and painted metal
- PU, epoxy and polyester paints, and fibreglass
- Traffic signs, bollards, containers, bus shelters and bridges
Not suitable for
- Damp substrates
- Surfaces with silicone, wax, oil, grease or fluorination
- More than one coat
10–12
ml per square metre
Technical information
| Product number | 42 |
|---|---|
| Category | Graffiti |
| Sizes | 125 ml, 250 ml, 1 L |
| Coverage | About 10 to 12 ml per square metre by HVLP sprayer, in one light film. |
| Lifetime | Up to 7 years. Lifespan depends on the material, use and how the surface is maintained. |
| Drying and curing | Touch dry after 1 hour and dry after 4 to 5 hours. Fully cured after 5 to 7 days at room temperature. |
Source: manufacturer's technical data sheet.
Directions for use
- The surface must be clean, grease-free and completely dry, at 5 to 30 °C and 30 to 80% relative humidity. Remove rust and flaking paint and degrease new metal.
- Apply one light film by HVLP sprayer, which works best, with a small roller, or with a brush on irregular shapes. Re-roll after about 30 seconds without adding more product.
- Do not spray back and forth. Correct mistakes within about 10 minutes. Apply only one coat.
- Touch dry after 1 hour and fully cured after 5 to 7 days. Clean equipment with acetone or n-butyl acetate, never with water.
Good to know
- Paint will not stick to the coating, so do any painting before you apply it.
- Avoid applying in wind, and keep dust and sawdust away while the coating dries.
- Remove graffiti only with Graffiti Remover as described. High pressure and other chemical cleaners can damage the coating.
- Store the container closed at 4 to 22 °C.
Safety
- Flammable. Keep away from heat and flames. No smoking.
- Harmful if swallowed, in contact with skin or if inhaled. May cause an allergic skin reaction and irritates the skin, eyes and respiratory tract.
- Wear gloves, eye protection and a respirator, work in a well-ventilated area and read the safety data sheet (SDS) before use.
Test on a small area first and read the safety data sheet before use.
Questions and answers
How long does the anti-graffiti protection last?
Up to 7 years, depending on the material, use and how the surface is maintained.
Do I need to re-apply after every clean?
No. The protection is not used up by cleaning, so graffiti can be removed many times without re-applying it. Use Graffiti Remover.
Which surfaces count as smooth?
Smooth, non-absorbent surfaces such as metal, powder-coated and painted surfaces and fibreglass. For concrete, brick and timber there is Anti-Graffiti Coating for Porous Surfaces.
Videos
Videos from Nanoman, in English.
Use with
Graffiti Remover is a system product intended for surfaces protected with Nanoman anti-graffiti coating.