Anti-Rust + Corrosion
Professional-grade product: a clear coating that protects metal from rust and corrosion.
- Nanotechnology formula
- Rust and corrosion protection
- About 5 years
- One coat
- Effective approximately 5 years, re-apply every 4-5 years
Pick up at Síðumúli 1 or delivery with Pósturinn or Dropp.
Key features
Anti-Rust + Corrosion is a clear, ready-to-use coating that protects metal surfaces from rust, dirt, weathering and corrosion. It is based on polysilazane nano technology, bonds to the substrate and cures at room temperature in atmospheric moisture.
The coating is invisible and bonds well to metal. A surface protected with it can be cleaned again and again without re-applying. The protection is UV-stable and chemical resistant and lasts about 5 years. It is then re-applied every 4 to 5 years.
This is a professional-grade product for trained applicators. It suits aluminium, zinc, stainless steel, copper, brass, bronze and tin, for example on tanks, ventilation, containers and outdoor metal furniture. Apply only one coat and avoid applying too much.
- Clear coating that protects metal from rust and corrosion
- Bonds well to metal
- UV-stable and chemical resistant
- Lasts about 5 years, re-applied every 4 to 5 years
- The surface can be cleaned again and again without re-applying
- One coat, ready to use
Suitable for
- Smooth, non-absorbent metal surfaces: aluminium, zinc, stainless steel, copper, brass, bronze and tin
- Outdoor metal furniture, bollards, cabinets and traffic signs
- Ventilation systems, containers and tanks
Not suitable for
- Damp substrates
- Surfaces with oil, grease, silicone, wax or fluorination
- More than one coat
| Product number | 43 |
|---|---|
| Category | Metal |
| Sizes | 125 ml, 250 ml, 1 L |
| Coverage | About 15 ml per square metre by HVLP sprayer. More is used by brush, less by cloth or pad. |
| Lifetime | About 5 years, re-applied every 4 to 5 years. Lifespan depends on the material, use and how the surface is maintained. |
| Drying and curing | Touch dry after about 1 hour. Water resistant after 8 to 12 hours at 22 °C and 50% humidity. Fully effective after 5 to 7 days. |
Source: manufacturer's technical data sheet.
Directions for use
- The surface must be clean, grease-free and completely dry, at 5 to 30 °C. Remove rust and flaking paint and degrease new metal.
- Open the container slowly. Wear gloves, goggles and a respirator.
- Apply with a microfibre applicator, flocked brush or HVLP or airless sprayer. Allow about 15 ml per square metre. One coat.
- Correct mistakes within about 10 minutes. Touch dry after about 1 hour and fully effective after 5 to 7 days.
Good to know
- The coating is clear and can go on smooth painted surfaces without harming the paint.
- Paint will not stick to the coating, so do any painting first.
- Once cured, the coating is hard to remove. It has to be sanded or lightly ground off.
- Store the container closed at 4 to 22 °C.
Safety
- Flammable. Keep away from heat and flames. No smoking.
- Harmful if swallowed, in contact with skin or if inhaled. May cause an allergic skin reaction and irritates the skin, eyes and respiratory tract.
- Wear gloves, eye protection and a respirator, work in a well-ventilated area and read the safety data sheet (SDS) before use.
Questions and answers
How long does Anti-Rust + Corrosion last?
About 5 years. It is re-applied every 4 to 5 years. It depends on the material, use and how the surface is maintained.
Can I apply more than one coat?
No. Apply only one coat and avoid applying too much.
What do I need to do to the metal first?
Remove rust and flaking paint, degrease, and let the surface dry completely before applying.
Videos
Videos from Nanoman, in English.