Boat Polish + Seal
Polish and seal in one step for gel coat, fibreglass and painted boats.
- Polish and seal
- High gloss
- 12 to 18 months
- Salt protection
- 12-18 months protection against weather, salt and dirt
Pick up at Síðumúli 1 or delivery with Pósturinn or Dropp.
Key features
With Boat Polish + Seal your boat is polished and protected in one step. The product is water-based and is applied by cloth or machine. It gives a high gloss and protects the surface against weather, salt and dirt for 12 to 18 months.
It suits gel coat, fibreglass and painted surfaces on yachts, boats, jet skis and commercial vessels. Apply it in small amounts and work one section at a time.
New surfaces get up to 18 months of protection. Re-apply once a year.
- Polishes and protects in one step
- High gloss
- Protects against weather, salt and dirt for 12 to 18 months
- For gel coat, fibreglass and painted boat surfaces
- Water-based, applied by hand or machine
- 100 ml covers about 10 square metres
Suitable for
- Gel coat, fibreglass and painted boat surfaces
- Yachts, boats, jet skis and commercial vessels
Not suitable for
- Application in direct sun or in wet weather
- Abrasive cloths
| Product number | 20 |
|---|---|
| Category | Other |
| Sizes | 100 ml, 250 ml, 1 L, 2 L, 5 L |
| Coverage | About 10 ml per square metre. 100 ml covers about 10 square metres. |
| Lifetime | 12 to 18 months, up to 18 months on new surfaces. Re-apply yearly. Lifespan depends on the material, use and how the surface is maintained. |
| Drying and curing | Keep the surface dry for 60 minutes. Residue is wiped off after about 15 minutes. Best performance is reached after 24 hours, and the boat should be dry and out of the water until then. |
Source: manufacturer's technical data sheet.
Directions for use
- Wash the boat. The surface must be clean, dry and free of grease and dirt. Do not use abrasive cloths.
- Shake the bottle well. Put a small amount on a pad or cloth and rub it in, one section at a time, in circles. You can also use a slow or medium-speed polisher.
- After about 15 minutes, wipe off the residue with a clean microfibre cloth. Keep the surface dry for at least 1 hour, then give it a final buff.
- Wait 24 hours for best performance and keep the boat dry and out of the water in the meantime.
Good to know
- In humid weather the coating takes longer to cure.
- Clean with water and a soft, damp cloth. Use a mild, neutral cleaner on stubborn marks.
- For glass, stainless steel and fabric on board, use the Nanoman products made for those materials.
- Store the bottle closed and away from light at 5 to 25 °C.
Safety
- Irritates the eyes. If it gets in your eyes, rinse immediately with cold water.
- Keep out of reach of children. Read the safety data sheet (SDS) before use.
Questions and answers
How long does the protection last?
12 to 18 months, up to 18 months on new surfaces. Re-apply yearly. It depends on the material, use and care.
Can I put the boat in the water straight away?
Preferably wait 24 hours. That is when you get the best performance, and the boat should stay dry and out of the water until then.
Can I use a polishing machine?
Yes, but use a slow or medium-speed machine. You can also apply it by hand.
Videos
Videos from Nanoman, in English.