Plastics Coating
Invisible coating for plastic, acrylic and synthetics that repels water and dirt.
- Water repellent
- Easy to clean
- Cuts cleaning time
- For plastic and acrylic
- Reduces cleaning time by up to 90 %
Pick up at Síðumúli 1 or delivery with Pósturinn or Dropp.
Key features
Plastics Coating is a clear nano coating for plastics and synthetics, including acrylic and Perspex. It forms an invisible layer that repels water and helps prevent marks and dirt build-up. The coating cuts cleaning time by up to 90% and is UV-stable.
It suits skylights, plastic and acrylic awnings and verandas, external cameras, shower cubicles, motorcycle helmet visors, outdoor furniture and playground equipment. On moving parts such as visors, airflow helps drive water away.
On moving parts such as visors and windscreens the coating lasts a shorter time than on stationary surfaces. Plastics Coating is made for a clean, dry surface and goes on in one coat.
- Repels water and helps prevent marks and dirt build-up
- Cuts cleaning time by up to 90%
- For plastic, acrylic, Perspex and other synthetics
- Invisible and UV-stable
- Suits visors, skylights, awnings and outdoor furniture
- One coat, about 10 ml per square metre
Suitable for
- Acrylic, Perspex and other plastics and synthetics
- Skylights, awnings and verandas
- External cameras, shower cubicles and helmet visors
- Outdoor furniture and playground equipment
Not suitable for
- Application in rain, direct sun or on hot surfaces
- Abrasive cloths and strongly alkaline cleaners on coated plastic
| Product number | 12 |
|---|---|
| Category | Other |
| Sizes | 125 ml, 250 ml, 750 ml, 1 L, 2 L, 5 L, 20 L |
| Coverage | About 10 ml per square metre, or 8 to 12 ml. |
| Lifetime | Lifespan depends on use and conditions. On moving parts such as helmet visors and windscreens it is much shorter than on stationary surfaces. Lifespan depends on the material, use and how the surface is maintained. |
| Drying and curing | Dries in 2 to 5 minutes before buffing. Keep dry for about 60 minutes and full performance is reached after 24 hours. |
Source: manufacturer's technical data sheet.
Directions for use
- Clean with Pre Cleaner and do not use abrasive cloths on clear plastic. The surface must be dry, at 5 to 35 °C.
- Shake the bottle well, spray on and wipe in with a lint-free cloth in circles or figure-eights. One coat, about 10 ml per square metre.
- After 2 to 5 minutes, buff off the haze with a microfibre cloth.
- Keep the surface dry for about 60 minutes. Full performance is reached after 24 hours.
Good to know
- In humid weather the coating takes longer to cure.
- Clean coated plastic with water and a soft, damp cloth. Use a mild, pH-neutral cleaner on stubborn marks.
- Store the bottle closed and away from light at 5 to 25 °C.
Safety
- Highly flammable. Keep away from heat and flames. No smoking.
- Wear gloves, ventilate well and avoid breathing the spray.
- Keep out of reach of children. Read the safety data sheet (SDS) before use.
Questions and answers
Is Plastics Coating suitable for helmet visors?
Yes, it suits motorcycle helmet visors. The coating lasts a shorter time there than on stationary surfaces, so expect to re-apply more often.
Which cloths should I use?
Use a lint-free cloth to apply and a microfibre cloth to buff. Avoid abrasive cloths on clear plastic.
Do I need to clean the plastic first?
Yes. Clean with Pre Cleaner and let the surface dry completely before you apply the coating.
Videos
Videos from Nanoman, in English.